The gravity bong is one of the most popular ways to enjoy smoking out of a water pipe. The reason this method works so well is because it allows for a more effective hit that’s easier on your lungs, throat and sinuses than regular weed-smoking methods. Here are some tips on how you can make your own gravity bong.
Tools and Supplies
- Glass jar or plastic bucket with lid (for storage)
- Bowl large enough to hold your jar, or a bucket and lid
- Rope or cord (optional)
- Small funnel (optional)
- Drill/screwdriver
- Water hose
- Vacuum pump (optional)
- Rubber gloves
- Large container for used water hose
- Plastic bag or trashcan liner
- Lid from a large garbage bin
- Saw or hacksaw blade
There are plenty of other tools that you could use to build a gravity bong, but these are the ones I recommend using as they’re all pretty easy to find at any hardware store. If you don’t have access to a hardware store, you should be able to find everything else you need online.
Step 1: Drill holes into the container
You will have to drill 4 holes in the side of your container. These holes will allow for the water hose to enter through them and fill up your gravity bong. You can either do this by hand or with a drill. This step takes about 5 minutes.
Step 2: Cut off bottom of glass jar
Once you are done drilling holes, cut off the bottom of the jar with a saw or hack saw. Now you won’t have to worry about filling up your gravity bong with water. Just put the top of the jar back on and you’ll be good to go.
Step 3: Fill with water
You can now take the bowl and fill it with water until its full. It may help to use a funnel to add extra water if the bowl is too small. Place it inside your gravity bong and set aside while we move on to the next steps. You don’t want to let the water run out and ruin your whole setup!
Step 4: Find your water hoses
Now that your bowl is filled with water, you must attach the water hoses to it before continuing. This isn’t the easiest process if you haven’t done it before. There are three different types of hoses, which I’ll explain below.
1. Water hose (usually used for a sink)
This type of hose has a threaded connector that screws onto the end. Simply thread the hose into each hole on your bowl and screw the connectors together. Be sure to tighten down the connections tightly so the water doesn’t leak.
2. Water hose w/o threads (used for garden hoses or water fountains)
These hoses come with a rubber fitting that fits over the end. Attach the hose to your bowl and then slip the rubber fitting into place. Tighten down the connection firmly to avoid leaks.
3. Plastic tubing (used for hydroponic setups)
This type of hose also comes with a rubber fitting. You will only need one and can easily find it at just about any garden supply store. Connect the tube to the fitting and attach it to the bowl.
With all three hoses attached, there isn’t much left to do except wait for your water to boil.
Step 5: Boil water
If you have a heat source nearby, such as a stove or fireplace, it would be best to use that instead. However, if not, you can use an outdoor grill or stovetop burner to bring the water to a rolling boil. Once boiling, turn off the heat source and wait for the water to cool down (about 10 minutes).
You can also use a propane torch if you have one available. Turn the flame on low, and let the water cool down. When it’s cool enough, it’s time to move on to the next step.
It comes with an ingenious filtration device so that it will make you hit. One must get insured first while buying a bong because there are so many options available in the market. Buy gravity bong for getting super-duper high with its first consumption only. You can also include multiple herbs through which you will get a flavourful fragrance. It will enhance the complete experience of consuming gravity bong.
Step 6: Pour in your herbs
To save yourself the hassle of having to clean every single drop out of your bowl after each use, you can pour in your dry herb mixture into the bowl. Some people prefer to do this while the water is still hot, but you can also do it when the water is still warm. Make sure you keep the lid securely in place during this part of the process.
Make sure to use a funnel to pour the herb into the bowl. Also, be careful not to spill any of the liquid around the bowl as you’ll risk ruining your setup.
Step 7: Screw on the lid
After you’ve poured in your dry herbs, screw the lid on tight to ensure no moisture gets out. If you’re feeling impatient, you can do this while the water is still hot, but I wouldn’t advise it as you may risk burning yourself.
It’s recommended that you wait a few hours after pouring in your herbs before moving on to the next step.
Step 8: Add ice cubes and water
Add ice cubes and water to the bowl. Make sure to stir thoroughly to get all of the dry herbs mixed in with the ice cubes and water. Once your mixture is completely cold, it’s time to strain it into your bowl. Remember to leave the lid on as you strain the herb mixture.
This may seem like a lot of work to go through, but once you get started, you’ll see why it was worth it. You’ll feel better right away when you start puffing on your homemade gravity bong. Plus, you’ll be saving a ton of money compared to buying pre-made bongs from local drug stores.
